Most heating and cooling systems fail at the worst possible time. A furnace that has not been touched in two or three years, an AC that has been running all summer without a check, a heat pump that nobody has looked at since it was installed: these are the systems that quit on a cold night or a hundred-degree afternoon. Getting ahead of that is the whole point of a scheduled service call, and it costs a great deal less than an emergency repair.
We handle heating and cooling for homes and rental properties throughout Hornsby Bend, and we are available every day from 5:30 AM to 9:00 PM to take the call.
Whether the system needs a tune-up, a repair, or a full replacement, call (737) 353-9556 and we will scope the job on the phone before anything is scheduled.
A property with no heating or no cooling is not a situation that waits well. When a system stops entirely, we take the call and move it to the front of the schedule. The visit is scoped on the phone first: what the system is doing, what equipment is involved, and what the visit will cover. Pricing is confirmed before anything is scheduled.
Rental properties and commercial spaces add a layer of complexity that a single-family home does not. A tenant cannot be left without heat or cooling for days, and a business that has to stay open needs a repair that works around its hours. When you call, let us know what the situation is and we will factor that into how the visit is arranged.
We are open every day from 5:30 AM to 9:00 PM. Emergency AC repair, emergency furnace repair, and emergency heat pump calls are all handled within those hours.
When the system is completely down, call (737) 353-9556 and we will go through what it is doing on the phone, confirm the scope and the price, and get the visit on the schedule.
Hornsby Bend has a mix of older homes and newer additions, and both produce the same problem: spaces that the central duct system was never designed to serve. A converted garage, a room built onto the back of the house, a detached structure used as an office or a workshop. Running new ductwork to any of those is expensive and often impractical.
A ductless mini-split system solves that problem directly. One outdoor unit connects to one or more indoor heads mounted on the wall, and each head conditions the space it serves independently. There is no ductwork to run, no return air to reroute, and no need to oversize the existing system to cover a space it was not designed for.
Mini-splits also work well in homes where zoning is the goal rather than an addition. If one part of the house runs warm and another runs cold regardless of what the thermostat says, a ductless system can address those zones without touching the main equipment. We handle mini-split installation, repair, and replacement for both residential and light commercial properties.
A quote for HVAC work is not a flat number that applies to every situation. The fault, the equipment, and the access all move it. A refrigerant recharge is a different job from a compressor replacement, and a furnace in an accessible utility room is a different job from one tucked into a tight attic space.
For repair work, the quote comes after the diagnostic. The technician identifies the fault, explains what caused it, and gives you the repair cost before any parts are ordered or work begins. For a replacement, the quote is built around the size and type of equipment the space actually needs, confirmed before anything is committed to.
What changes a quote is straightforward: what the fault turns out to be, what has to be reached to fix it, and whether a repair or a replacement is the better answer for the equipment's age and condition. None of that is guesswork. It gets explained on the call and again on-site before the work starts.
Call (737) 353-9556 and we will give you the rate on the phone and confirm the scope before the visit is scheduled.
A system that starts, runs for a minute or two, and then shuts off before the space reaches temperature is short cycling. It is harder on the equipment than a normal run cycle, and it is almost always pointing at something specific: a refrigerant issue, a dirty evaporator coil, an oversized unit, or a fault in the control board. Short cycling is worth diagnosing early because the underlying cause tends to get worse, not better, with time.
Installing a central air system in a home that does not have one involves more than placing a unit. The ductwork has to be designed and sized for the space, the air handler positioned correctly, and the refrigerant lines run and charged. We handle the full installation process and confirm the scope and pricing on the call before anything starts.
An AC that is low on refrigerant is not a system that just needs a top-off. Refrigerant does not get consumed in normal operation. When the level is low, there is a leak somewhere, and recharging without finding it means the same problem returns. We locate the leak, explain what caused it and where it is, and give you the repair cost before any work is done.
The heat exchanger is the component in a gas furnace that separates combustion gases from the air that circulates through the home. A cracked heat exchanger is a serious fault, not a minor one, because combustion byproducts can enter the living space. If a furnace inspection turns up a heat exchanger concern, that gets explained clearly and the options are laid out before any decision is made.
Humidity affects comfort in both directions. In a humid summer, indoor moisture stays elevated even when the AC is running normally, because the cooling system is not sized or designed to manage humidity independently. A whole-home dehumidifier addresses that. In dry winter conditions, a whole-home humidifier prevents the dry air that makes a heated space feel colder than it is. Both integrate with the existing system and are sized to the home on the call before installation is scheduled.
Air quality inside a home is shaped by what the HVAC system is pulling out of the air and what it is leaving behind. A standard one-inch filter keeps the equipment from clogging. It does not do much for fine particulates, allergens, or the airborne material that affects people with respiratory sensitivities. A filtration upgrade changes that picture.
Higher-efficiency filtration captures smaller particles without restricting airflow, but the right filter depends on the equipment and the ductwork. A filter that is too restrictive for the system reduces airflow and puts stress on the blower. We match the filtration to the equipment and explain the difference in what it removes before anything is installed.
In this region, summer humidity is the more common complaint, but winter dryness is real too. A whole-home dehumidifier keeps indoor moisture in a comfortable range across the entire living space, not just one room. A whole-home humidifier does the same in the other direction. Both are installed as part of the existing HVAC system, and what a tune-up covers gets spelled out before it is booked, which applies to humidity equipment the same way it applies to the rest of the system. For what the job actually entails, the HVAC services page lays it out.
A SEER rating or an AFUE percentage tells you what a unit can do under test conditions. What it actually does in a specific home depends on how well the equipment is sized, how the ductwork is configured, and how the system is installed. An oversized AC unit in a home with leaking ducts will not perform anywhere near its rated efficiency, regardless of what the label says.
Getting the efficiency the equipment is rated for requires the right equipment for the space, correctly installed and commissioned. It also requires the ductwork to be in reasonable condition. Leaking ducts bleed conditioned air into unconditioned spaces, and no amount of equipment efficiency makes up for air that never reaches the room it was meant for. When we quote a replacement, the sizing conversation is part of it. When a tune-up turns up a duct issue, that gets noted and explained before the visit is closed.
We serve Hornsby Bend and the communities nearby throughout Travis County. If your property is in Garfield, Webberville, Manor, Wyldwood, or the Austin area, the call works the same way: scope the job on the phone, confirm the price, then schedule.
Coverage includes residential homes, rental properties, and light commercial buildings across the area.
If you are unsure whether your address falls within the service area, call (737) 353-9556 and we will confirm it on the call.
Location within the service area does not change how the visit is arranged or what the call covers. When you call, the job is scoped on the phone, the rate is confirmed, and the visit is scheduled based on what is available. Whether the property is in Hornsby Bend, Webberville, or anywhere else in Travis County, the process is the same from the first call to the final test.
Older homes tend to have equipment that has run well past the point where efficiency and reliability hold up, along with ductwork that was never sealed properly or has developed leaks over time. Rooms that are consistently too warm or too cold, systems that run longer than they should to reach temperature, and units that need frequent repairs are all common. A diagnostic visit identifies what is actually causing the problem rather than working through a list of possibilities.
Yes, a gradual decline in performance is worth a call before it becomes a complete failure. A system that takes longer to reach the set temperature, runs more often than it used to, or leaves some rooms uncomfortable is telling you something has changed. Catching the cause early is almost always less disruptive than waiting for the system to stop entirely.
During a full system replacement, there will be a period when the old equipment is removed and the new equipment is not yet running. The length of that period depends on the scope of the job. For a straightforward like-for-like replacement, the downtime is usually a matter of hours. For a more complex installation, it may be longer. The expected downtime is explained before the work begins so you can plan accordingly.
Existing ductwork can often be reused if it is in good condition and sized appropriately for the new equipment. Ductwork that is undersized, heavily leaking, or deteriorated may need to be repaired or replaced alongside the new system, since poorly matched or leaking ducts will undercut the performance of even a new, properly sized unit. The condition of the existing ducts is assessed as part of the replacement scoping process.
It is always worth checking the thermostat first. Confirm the mode is correct, the temperature setting is where you expect it, and the batteries or power supply to the thermostat are good. A thermostat that has lost its settings or is reading the room temperature incorrectly can cause symptoms that look like an equipment fault. If the controls check out and the problem persists, that information is useful when you call.
Call (737) 353-9556 and tell us what the equipment is doing.
A few questions on the phone are usually enough to scope the job, confirm the rate, and get the visit on the calendar. We handle heating and cooling across Hornsby Bend and Travis County, every day from 5:30 AM to 9:00 PM.
HVAC service nearby: Manor, Wyldwood, Cedar Creek.
Below is a quick look at the heating and cooling work we handle for homes and businesses in Hornsby Bend and across Travis County. Each service is scoped on the call before anything is scheduled, and the price is confirmed before any work begins. If you have a question about a specific service or situation, call us and we will walk through the details with you.
| Service | What It Covers | Best Suited For | Helpful Details |
|---|---|---|---|
| Seasonal Maintenance & Tune-Ups | Coil and filter inspectionRefrigerant level and pressure checkBlower and air handler performance reviewThermostat calibration | Homeowners and property managers who want to catch small faults before they become failures at the worst time of year | A pre-season AC tune-up in spring and a heating tune-up in fall are the two visits most likely to prevent an emergency call during peak demand |
| AC Repair & Service | Fault diagnosis and repairRefrigerant level checkAirflow and coil inspectionComponent testing | Any home or building where the AC is not cooling, running constantly, or making unusual noises | Central Texas summers put heavy demand on cooling equipment, so catching a fault early keeps a repair from turning into a replacement |
| Full System Installation & Replacement | Load calculation for the spaceEquipment selection and sizingFull system installationPerformance test before sign-off | Homes and commercial properties where the existing system has reached the end of its useful life or repair costs no longer make sense | Correct sizing matters more than brand in Central Texas, where an undersized unit will run constantly through a long summer and wear out faster |
Every job in Hornsby Bend and Travis County starts the same way: a call where we scope the work, confirm the price, and answer your questions before anything is scheduled. Call (737) 353-9556 and we will get you the details you need.
(737) 353-9556